![](https://ucarecdn.com/318c32ce-157e-433b-8f99-66a56c78850e/-/format/auto/-/preview/3000x3000/-/quality/lighter/beg%20guide%20mag04%20mobile%20banner.jpg)
![](https://ucarecdn.com/25cfe8dc-c474-493a-b792-f787e40e0198/-/format/auto/-/preview/3000x3000/-/quality/lighter/TOP-BANNER-1800X450-beg-guide-mag04.jpg)
Step 1
![](https://ucarecdn.com/6f1badbe-2033-46ed-9360-7a07af375927/-/format/auto/-/preview/3000x3000/-/quality/lighter/step%201.jpg)
Cut the two largest snowflake outer edge dies and layer together to form the backing for your 3D snowflake.
Step 2
![](https://ucarecdn.com/7c7a67ee-8972-425b-b131-4d1b76a1a4f8/-/format/auto/-/preview/3000x3000/-/quality/lighter/step%202.jpg)
To create 3D baubles you need three die cuts of the same bauble die. Fold each die cut and glue half of one bauble to the next.
Step 3
![](https://ucarecdn.com/6d25306d-721c-430e-896b-552ac8d326a8/-/format/auto/-/preview/3000x3000/-/quality/lighter/step%203.jpg)
Add the final die cut and you bauble is ready to attach.
Step 4
![](https://ucarecdn.com/99ef85ef-edb3-4a67-81f7-255da9dbf874/-/format/auto/-/preview/3000x3000/-/quality/lighter/step%204.jpg)
Make six of the large round baubles. make six of the smaller shaped baubles.
Step 5
![](https://ucarecdn.com/2ab05616-82e3-4b16-ac8b-dede80c437aa/-/format/auto/-/preview/3000x3000/-/quality/lighter/step%205.jpg)
Taking the small round bauble die, cut six for your backing layers and another six adding the pattern die, fold and layer these.
Step 6
![](https://ucarecdn.com/68e9b343-916a-4dad-93b8-6557f206fc80/-/format/auto/-/preview/3000x3000/-/quality/lighter/step%206.jpg)
To assemble your 3D Snowflake, adhere the large round baubles evenly to the backing layer, lining up with the shaped edge.
Step 7
![](https://ucarecdn.com/110f014a-16c6-4a21-9a19-fd9463886037/-/format/auto/-/preview/3000x3000/-/quality/lighter/step%207.jpg)
Next, attach the smaller shaped bauble in between, lining up with the die cut layer on the snowflake backing.
Step 8
![](https://ucarecdn.com/738613b0-4379-4a68-87bb-4d45e49b8d42/-/format/auto/-/preview/3000x3000/-/quality/lighter/step%208.jpg)
Add the folded small round bauble to the lower section of the large round bauble.
Step 9
![](https://ucarecdn.com/6c512c73-c152-415c-8585-b70747b1e515/-/format/auto/-/preview/3000x3000/-/quality/lighter/step%209.jpg)
Finish with a layered snowflake in the centre, use foam pads to adhere in place.
Crafting Essentials